PA AGYAKWA, MR CORFIELD, L YANG, JF LI, VMF MARQUES, C M JOHNSON, 2011. Microstructural evolution of ultrasonically bonded high purity Al wire during extended range thermal cycling Microelectronics Reliability. 51(2), 406-415
CYRIL BUTTAY, AMANDINE MASSON, JIANFENG LI, MARK JOHNSON, CHRISTOPHE RAYNAUD, HERVÉ MOREL MIHAI LAZAR, 2011. Die Attach of Power Devices Using Silver Sintering - Bonding Process Optimisation and Characterization In: The International Conference and Exhibition on High Temperature Electronics Network (HiTEN 2011), July 18-20, 2011, Oxford. pp 084-090 (In Press.)
CASTELLAZZI, A., SOLOMON, A., AGYAKWA, P., LI, J., TRENTIN, A. and JOHNSON, C. M., 2010. High power density, low stray inductance, double sided cooled matrix-converter type switch In: 2010 International Power Electronics Conference (IPEC).
MATTEY, N., SKURIAT, R., LI, J., AGYAKWA, P., EVANS, P. and JOHNSON, C.M., 2010. Thermal and mechanical design optimization of a pressure-mounted base-plate-less high temperature power module In: Electronic System-Integration Technology Conference (ESTC), 13-16 Sept. 2010.
AGYAKWA, P., CORFIELD, M., LI, J., JOHNSON, C., HOGG, S., LIOTTI, E. and LOH, W., 2010. Unusual Observations in the Wear-out of High Purity Aluminium Wire Bonds under Extended Range Passive Thermal Cycling IEEE Transactions on Device and Materials Reliability.
J.F. LI, P.A. AGYAKWA, C.M. JOHNSON, D. ZHANG, T. HUSSAIN, D.G. MCCARTNEY, 2010. Characterization and solderability of cold sprayed Sn coatings on both Al and Cu substrates Surface and Coatings Technology. 204, 1395-1404 ADANE SOLOMON, ALBERTO CASTELLAZZI, RUTH HOYLAND, PEARL AGYAKWA, JIANFENG LI, MARK JOHNSON, 2009. A Highly Integrated High-Voltage Bi-Directional Switch In: ISDRS 2009. Paper 38
K. CHEN, C. LIU, D.C. WHALLEY, D.A. HUTT, J.F. LI, S.H. MANNAN, 2008. A comparative study of the interfacial reaction between electroless Ni–P coatings and molten tin Acta Materialia. 56(19), 5668-5676 (In Press.)
J.F. LI, S.H. MANNAN, M.P. CLODE, C. LIU, K. CHEN, D.C. WHALLEY, D.A. HUTT, P.P. CONWAY, 2008. Interfacial reaction between molten Sn-Bi based solders and electroless Ni-P coatings for liquid solder interconnects IEEE Transactions on Components and Packaging Technologies. 31(3), 574-585 J.F. LI, S.H. MANNAN, M.P. CLODE, C. JOHNSTON, A. CROSSLEY, 2007. Dissolution and interfacial reaction of Nb in contact with the molten 52In-48Sn solder Acta Materialia. 55(15), 5057-5071 (In Press.)
JIANFENG LI, FARHAD SARVAR, DAVID .C. WHALLEY, DAVID A. HUTT, MIKE P. CLODE, SAMJID H. MANNAN, 2007. Failure Mechanisms of Dummy IGBT Assembles Constructed Using Liquid In-Sn/Nb System In: Proceedings of 9th Electronics Packaging Technology Conference (EPTC 2007), Grand Copthorne Waterfront Hotel, Singapore, 10-12 December 2007. 43-46 (In Press.)
J.F. LI, S.H. MANNAN, M.P. CLODE, K. CHEN, D.C. WHALLEY, C. LIU, D.A. HUTT, 2007. Comparison of interfacial reactions of Ni and Ni-P in extended contact with liquid Sn-Bi based solders Acta Materialia. 55(2), 737-752 J.F. LI, S.H. MANNAN, M.P. CLODE, 2006. Lifetime Of Solid Metals In Contact With Liquid Solders For High-Temperature Liquid Solder Assemblies Scripta Materialia. 54, 1773-1778 (In Press.)
K. CHEN, C. LIU, D.C. WHALLEY, D.A.C. HUTT, J.F. LI, S.H. MANNAN, 2006. Electroless Ni-W-P Alloys as Barrier Coatings for Liquid Solder Interconnects In: Proceedings of the 1st IEEE Electronic Systemintegration Technology Conference (ISBN: 1-4244-0553-X), Dresden, Germany, Sept 5 - 7, 2006. pp 421 – 427 (In Press.)
J.F. LI, S.H. MANNAN, M.P. CLODE, 2006. Edge effects in intermetallic compound crystal growth between Nb and molten 52In-48Sn solder Applied Physics Letters. 88, 104105-1-3 (In Press.)
JIANFENG LI, SAMJID H. MANNAN, MIKE P. CLODE, DAVID N. FENNER, DAVID .C. WHALLEY, KEMING CHEN, 2006. Reliability and failure analysis of dummy IGBT assembles using liquid solder joints under thermal cycling In: Proceedings of International Conference and Exhibition on High Temperature Electronics (HiTEC 2006), Santa Fe, USA, May 15-18, 2006. pp 390-397 (In Press.)
J.F. LI, H. LIAO, C.X. DING, C. CODDET, 2005. Optimizing the plasma spray process parameters of yttria stabilized zirconia coatings using a uniform design of experiments Journal of Material Processing Technology. 160(1), 34-42 (In Press.)
J.F. LI, S.H. MANNAN, M.P. CLODE, H.M. LOBATO, C. LIU, D.C. WHALLEY, F.T. LAWRENCE, G. JACKSON, H. STEEN, 2005. Interactions Between Liquid Sn-Bi Based Solders with Contact Metals for High Temperature Applications In: Proceedings of the 55th Electronics Components and Technology Conference (ECTC'55, ISSN 0569-5503) , Lake Buena Vista, Fl, USA, 31st May 2005. pp 441-451 (In Press.)
JIANFENG LI, CHANGQING LIU, KEMING CHEN, SAMJID H. MANNAN, MIKE P. CLODE, DAVID C. WHALLEY, DAVID A. HUTT, PAUL P. CONWAY, 2005. Molten Solder Interconnects I: Evaluation of Sn-Bi-X / Cu systems and failure mechanisms of LGA assemblies In: Proceedings of HITEN 2005, 6-8 September 2005, Paris, France. (In Press.)
J.F. LI, L. LI, C.X. DING, 2005. Thermal diffusivity of plasma sprayed Cr3C2-NiCr coatings Materials Science and Engineering A: Structural Materials: Properties,Microstructures and Processing. 394(1-2), 229-237 (In Press.)
KEMING CHEN, JIANFENG LI, CHANGQING LIU, DAVID .C. WHALLEY, DAVID A. HUTT, PAUL P. CONWAY, SAMJID H. MANNAN, MIKE P. CLODE, H. LOBATO, 2005. Molten Solder Interconnects II: Reactions between Ni substrates and Sn-Bi based solders In: Proceedings of HITEN 2005, 6-8 September 2005, Paris, France. (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2004. Statistical approach for minimizing cracks in combined flame spraying and laser surface modification of refractory ceramics Journal of the European Ceramic Society. 24(13), 3509-3520 (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2004. Fractal characteristics of apparent pores present on polished cross sections of alumina coatings prepared by laser-assisted flame hybrid spraying Thin Solid Films. 453-454, 229-233 (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2004. Comparison of volumetric and surface heating sources in the modeling of laser melting of ceramic materials International Journal of Heat and Mass Transfer. 47(6-7), 1159-1174 (In Press.)
J.F. LI, X.Y. WANG, H. LIAO, C.X. DING, C. CODDET, 2004. Indentation analysis of plasma sprayed Cr3C2-NiCr coatings Journal of Materials Science. 39(23), 7111-7114 (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2004. Crystallographical analysis of surface layers of refractory ceramic formed using combined flame spray and simultaneous laser treatment Journal of the European Ceramic Society. 24(10-11), 3129-3138 (In Press.)
J.F. LI, H. LIAO, X.Y. WANG, C. CODDET, H. CHENG, C.X. DING, 2004. Plasma spraying of nanostructured partially yttria stabilized zirconia powders Thin Solid Films. 460, 101-115 (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2004. Predictions of flow velocity and velocity boundary layer thickness at surface during laser melting of ceramic materials Journal of Physics D: Applied Physics. 37, 1710-1717 (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2004. Multi-layered surface coatings of refractory ceramics prepared by combined laser and flame spraying Surface and Coatings Technology. 180-181, 499-504 (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2004. Thermal stresses and their implication on cracking during laser melting of ceramic materials, Acta Materialia. 52(14), 4385-4398 (In Press.)
J.F. LI, H. LIAO, X.Y. WANG, B. NORMAND, V. JI, C.X. DING, C. CODDET, 2004. Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder Tribology International. 37, 77-84 (In Press.)
X.Y. WANG, J.F. LI, H. LIAO, C.X. DING, C. CODDET, 2003. Effect of a localized thermal treatment process on the electrochemical behaviour of thermally sprayed nickel-based alloy Surface and Coatings Technology. 166, 167-175 (In Press.)
JIANFENG LI, HANLIN LIAO, XIAOYAN WANG, CHRISTIAN CODDET, 2003. Fractal perimeters of polishing-Induced pull outs present on metallographic cross sections of plasma sprayed yttria stabilized zirconia coatings Journal of the American Ceramic Society. 86(11), 1906-1910 (In Press.)
J.F. LI, L. LI, F.H. STOTT, 2003. Surface modification of refractory ceramic using combined flame spraying and laser surface coating In: Proceedings of the 22nd International Congress on Applications of Lasers & Electro-Optics, October 13-16, 2003, Jacksonville, Florida, USA. P512 (In Press.)
J.F. LI, H. LIAO, B. NORMAND, C. CORDIER, G. MAURIN, J. FOCT, C. CODDET, 2003. Uniform design method for optimization of process parameters of plasma sprayed TiN coatings Surface and Coatings Technology. 176, 1-13 (In Press.)
JIANFENG LI, HANLIN LIAO, CHRISTIAN CODDET, 2002. Friction and wear behavior of flame-sprayed PEEK coatings Wear. 252, 824-831 (In Press.)
H.L. LIAO, J.F. LI, S. LAURENCE, C. CODDET, 2002. Mechanical properties and friction behavior of thermal spray PEEK coatings In: Zhang, Z.R. Zhou, J.J. Liu, M.H. Zhu (eds.), 3rd International Conference on Surface Engineering: Contributions of Surface Engineering to Modern Manufacturing and Remanufacturing, Chengdu, China, Oct 10-13, 2002. pp 150-156. (In Press.)
CHUANXIAN DING, JIANFENG LI, JI HENG, 2001. Mathematical model of microhardness of plasma-sprayed chromium oxide coating In: Ceramic Materials and Components for Engines, [Internatiol Symposium], 7th, Goslar, Germany, June 19-21, 2000, Wiley-VCH Verlag GmbH, Weinheim, Germany. pp 299-303. (In Press.)
JIANFENG LI, JINGQI HUANG, HENG JI, CHUANXIAN DING, 2001. Process optimization of microhardness of plasma sprayed Cr2O3 coating Journal of the Chinese Ceramic Society (in Chinese). 29(1), 49-53. (In Press.)
J.F. LI, C.X. DING, 2001. Characterization and tribological properties of electroless plated Ni-Co on plasma-sprayed Cr3C2-NiCr coating In: C. C. Berndt, K. A. Khor, E. F. Lugscheider (eds.), Thermal Spray 2001: New Surface for a New Millennium, ASM International, Materials Park, OH. pp 1099-1104 (In Press.)
JIANFENG LI, CHUANXIAN DING, 2001. Self-mated tribological properties of plasma-sprayed chromium carbide coating In: Ceramic Materials and Components for Engines, [International Symposium], 7th, Goslar, Germany, June 19-21, 2000, Wiley-VCH Verlag GmbH, Weinheim, Germany. pp 187-192 (In Press.)
J.F. LI, C.X. DING, 2001. Determining microhardness and elastic modulus of plasma-sprayed Cr3C2-NiCr coatings using Knoop indentation testing Surface and Coatings Technology. 135, 229-237 (In Press.)
JIANFENG LI, CHUANXIAN DING, 2001. Tribological properties of plasma-sprayed Cr3C2-NiCr coating against toughened SiC ceramics under water-lubricated sliding Tribology (in Chinese). 21(2), 90-93 (In Press.)
JIANFENG LI, CHUANXIAN DING, 2001. Tribological properties of plasma-sprayed Cr3C2-NiCr coating without or with electroless plated Ni Journal of Inorganic Materials (in Chinese). 16(1), 103-109. (In Press.)
J.F. LI, C.X. DING, 2000. Improvement in tribological properties of plasma-sprayed Cr3C2-NiCr coating followed by electroless Ni-based alloy plating Wear. 240, 180-185 (In Press.)
J.F. LI, C.X. DING, 2000. Improvement in properties of plasma-sprayed chromium carbide coating using Ni-clad Cr3C2 powders Surface and Coatings Technology. 130, 15-19 (In Press.)
J.F. LI, C.X. DING, 2000. Fractal character of circumferences of polishing-induced pull outs of plasma sprayed Cr3C2-NiCr coatings Thin Solid Films. 376(1-2), 179-182 (In Press.)
JIANFENG LI, CHUANXIAN DING, 2000. Study on Vickers hardness of plasma-sprayed Cr3C2-NiCr coatings Journal of the Chinese Ceramic Society (in Chinese). 28(3), 223-228 (In Press.)
J.F. LI, C.X. DING, 1999. Polished-induced pull outs of plasma-sprayed Cr3C2-NiCr coatings Journal of Materials Science Letters. 18, 1719-1721 (In Press.)
J.F. LI, C. X. DING, 1999. Statistical analysis of porosity variations in plasma-sprayed Cr3C2-NiCr coatings Journal of Materials Science Letters. 18, 1591-1593 (In Press.)
J.F. LI, C.X. DING, 1998. Crystalline orientation of plasma-sprayed TiO2 coatings Journal of Materials Science Letters. 17, 1747-1749 (In Press.)
JIANFENG LI, JINGQI HUANG, YEFANF ZHANG, CHUANXIAN DING, 1998. Tribological properties of plasma-sprayed coatings under water-lubricated sliding Journal of Inorganic Materials (in Chinese). 13(4), 514-520 (In Press.)
JIANFENG LI, CHUANXAIN DING, 1998. Statistical analysis of microhardness variation in plasma sprayed Cr3C2-NiCr coatings Journal of the Korean Vacuum Society. 7(S1), 171-178 (In Press.)
JIANFENG LI, JINGQI HUANG, SHOUHONG TAN, ZHONGMING CHENG, CHUANXIAN DING, 1998. Tribological properties of toughened SiC ceramics under water-lubricated sliding Journal of the Chinese Ceramic Society (in Chinese). 26(3), 305-312. (In Press.)
J. LI, Y ZHANG, J. HUANG, C. DING, 1998. Mechanical and tribological properties of plasma-sprayed Cr3C2-NiCr, WC-Co and Cr2O3 coatings Journal of Thermal Spray Technology. 7(2), 242-246 (In Press.)
J.F. LI, J.Q. HUANG, S.H. TAN, Z.M. CHENG, C.X. DING, 1998. Tribological properties of silicon carbide under water-lubricated sliding Wear. 218, 167-171 (In Press.)
C. DING, J. LI, L. ZHANG, X. YU, 1998. Wear evaluation of plasma sprayed oxide and carbide coatings In: C. Coddet (ed.), Thermal Spray: Meeting the Challenges of the 21st Century, ASM International, Materials Park, OH. pp 275-279. (In Press.)
J.F. LI, J.Q, HUANG, Y.F. ZHANG, C.X. DING, P.Y. ZHANG, 1998. Friction and wear behaviour of plasma-sprayed Cr3C2-NiCr against TiO2 coating under water- and ethanol-lubricated sliding Wear. 214, 202-206 (In Press.)
JIANFENG LI, XIANQIANG LI, CHUANXIAN DING, PINGYU ZHANG, 1997. Sliding friction and wear ofchromium carbide-nickel chromium coating against ceramic materials Journal of Zhengzhou University of Technology (in Chinese). 18(1), 17-23. (In Press.)
CHUANXIAN DING, JIANFENG LI, JINGQI HUANG, 1997. Tribological properties of plasma-sprayed chromium oxide coating against different materials In: 6th International Symposium on Ceramic Materials and Component for Engines, October 19-23 1997, Arita, Japan. pp 526-529. (In Press.)
J.F. LI, C.X. DING, J.Q. HUANG, P.Y. ZHANG, 1997. Wear mechanism of plasma-sprayed Cr3C2-NiCr against TiO2 coating Wear. 211, 177-184 (In Press.)
XIANQIANG LI, JIANFENG LI, CHUANXIAN DING, ZONGCHENG ZHANG, PINGYU ZHANG, 1996. Plasma sprayed Al2O3-TiO2 and Cr3C2-NiCr based coatings and their wear characteristics Journal of Zhengzhou University of Technology (in Chinese). 17(2), 11-16. (In Press.)
JIANFENG LI, WEIWEI DAI, CHUANXIAN DING, PINGYU ZHANG, 1996. Tribological properties of plasma-sprayed Cr3C2-NiCr coating Tribology (in Chinese). 16(1), 14-20. (In Press.)
W.W. DAI, C.X. DING, J.F. LI, Y.F. ZHANG, P.Y. ZHANG, 1996. Wear mechanism of plasma-sprayed TiO2 coating against stainless steel Wear. 196, 238-242 (In Press.)
CHUANXIAN DING, JIANFENG LI,, 1995. Plasma sprayed wear-resistant ceramic coatings Thermal Spray Technology (in Chinese). 1(1), 25-28 (In Press.)
JIANFENG LI, WEIWEI DAI, CHUANXIAN DING, 1995. Study on sliding wear of plasma-sprayed Cr3C2-NiCr coating Journal of the Chinese Nonferrous Metal (in Chinese). 9, 823-827. (In Press.)