Joel Segal

Contact

• workRoom A48 Coates Building
  University Park
  Nottingham
  NG7 2RD
  UK
• work0115 951 4012
• fax0115 951 3800
• joel.segal@nottingham.ac.uk
• http://www.precisionmanufacturing.co.uk/

Research Summary

Joel's research interests are in micro and nano replication technologies, nanoscale fabrication and additive manufacture. His portfolio includes the generation of micro-structures for tissue… read more

Recent Publications

• AFAZOV, S M, RATCHEV, S M, SEGAL, J I and POPOV, A A, 2012. Chatter modelling in micro-milling by considering process nonlinearities International Journal of Machine Tools and Manufacture. 56, 28-38
• LEMON, G., HOWARD, D., YANG, H., RATCHEV, S.M., SEGAL, J.I., ROSE, F.R.A.J., JENSEN, O.E., WATERS, S.L. and KING, J.R., 2011. Growth of the chorioallantoic membrane into a rapid-prototyped model pore system: experiments and mathematical model Biomechanics and Modeling in Mechanobiology. 10, 539-558
• AFAZOV, S.M., RATCHEV, S.M., BECKER, A.A., LIU, S. and SEGAL, J., 2011. Numerical analyses of turning-induced and mapped Ti6Al4V residual stresses for a disc subjected to centrifugal loading International Journal of Automation Technology. 5(3), 326-333
• AFAZOV, S., RATCHEV, S. and SEGAL, J., 2011. Effects of the Cutting Tool Edge Radius on the Stability Lobes in Micro-milling In: 13th CIRP Conference on Modelling of Machining Operations, Sintra, Portugal; Also published in Advanced Materials Research. 223, 859-868

• View all publications

Current Research

Joel's research interests are in micro and nano replication technologies, nanoscale fabrication and additive manufacture. His portfolio includes the generation of micro-structures for tissue engineering. He is currently supervising PhD researchers in micro injection moulding, micro metrology, regenerative medicine, micro/nano scale manufacture of millirobot devices and lean manufacturing.

He is a co-investigator in the EPSRC Centre for Innovative Manufacture in Regenerative Medicine, a co-investigator in MicroTool (an IMRC project on micro-manufacture), NanoCom (an EU FP7 Coordinated Action on commercialisation of Nanotechnology) and MINAM 2.0 (an EU FP7 Coordinated Action on micro and nano manufacturing). He has held two Bridging the Gaps awards for initiating collaborative research with colleagues in Physics, Microbiology & Nursing, Midwifery and Physiotherapy. Joel has several peer-reviewed publications, has presented at international conferences worldwide, contributed to a book on Rapid Prototyping case studies and is a contributor to the annual state of the industry report produced by Terry Wohlers. His expertise has assisted the recent development of a novel hand hygiene device for children.

• AFAZOV, S M, RATCHEV, S M, SEGAL, J I and POPOV, A A, 2012. Chatter modelling in micro-milling by considering process nonlinearities International Journal of Machine Tools and Manufacture. 56, 28-38
• LEMON, G., HOWARD, D., YANG, H., RATCHEV, S.M., SEGAL, J.I., ROSE, F.R.A.J., JENSEN, O.E., WATERS, S.L. and KING, J.R., 2011. Growth of the chorioallantoic membrane into a rapid-prototyped model pore system: experiments and mathematical model Biomechanics and Modeling in Mechanobiology. 10, 539-558
• AFAZOV, S.M., RATCHEV, S.M., BECKER, A.A., LIU, S. and SEGAL, J., 2011. Numerical analyses of turning-induced and mapped Ti6Al4V residual stresses for a disc subjected to centrifugal loading International Journal of Automation Technology. 5(3), 326-333
• AFAZOV, S., RATCHEV, S. and SEGAL, J., 2011. Effects of the Cutting Tool Edge Radius on the Stability Lobes in Micro-milling In: 13th CIRP Conference on Modelling of Machining Operations, Sintra, Portugal; Also published in Advanced Materials Research. 223, 859-868
• AFAZOV, S M, RATCHEV, S M and SEGAL, J, 2011. Determination of Cutting Forces and Process Stability in Micro-Milling of Ti6Al4V Alloy by Considering the Size-Effect Phenomenon Micro and Nanosystems. 3(3), 199-209
• AFAZOV, S., RATCHEV, S. and SEGAL, J., 2010. A New Approach for Predicting Micro-milling Cutting Forces using FEA In: 5th International Conference on MicroManufacturing, Madison, USA. 25-30
• AFAZOV, S.M., RATCHEV, S.M. and SEGAL, J., 2010. FE modelling of size-effect in micro-machining using the strain gradient plasticity theory In: 7th International Conference on Multi-Material Micro Manufacture,Bourg en Bresse and Oyonnax, France. 178-183
• AFAZOV, S.M., RATCHEV, S.M. and SEGAL, J., 2010. Modelling and simulation of micro-milling cutting forces Journal of Materials Processing Technology. 210(15), 2154-2162
• HARDIE, K, RANDLE, J, SEGAL, J and WINDRUM, C. AND NERLICH, B., 2010. Involving Children in Hand Hygiene. In: Bridging the Gaps Conference.
• HARDIE, K, RANDLE, J, SEGAL, J and WINDRUM, C. AND NERLICH, B., 2010. Improving children’s hand hygiene compliance through play In: International conference of interactive technologies and games..
• YANG, H., SEGAL, J., TURITTO, M. and RATCHEV, S., 2009. Rapid Manufacturing of micro fluidic devices by microstereolithography In: 4M/ICOMM 2009 - The Global Conference on Micro Manufacturing. 157 - 160
• D. SMALE, S. RATCHEV, J. SEGAL, R. K. LEACH, J. D. CLAVERLEY, 2009. Assembly of the stem and tip of an innovative micro-CMM probe In: 9th International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance LAMDAMAP 2009.
• YANG, H., RATCHEV, S., TURITTO, M. and SEGAL, J., 2009. Rapid Manufacturing of Non-Assembly Complex Micro-Devices by Microstereolithography Tsinghua Science & Technology. VOL 14(SUPP/1), 164-167
• H. YANG, S. RATCHEV, R. RONALDO, J. SEGAL, 2009. Focused Ion Beam machining of Photonic devices In: 9th International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance LAMDAMAP 2009.
• MEDRANO, A, FOLKES, J, SEGAL, J and PASHBY, I, 2009. Fibre Laser Metal Deposition With Wire: Parameters Study And Temperature Monitoring System
• MOK, S. H, BI, G, FOLKES, J and PASHBY, I. R., 2008. Deposition of Ti–6Al–4V using a high power diode laser and wire, Part I: Investigation on the process characteristics Surface and Coatings Technology. 202(16), 3933-3939
• MOK, S. H., BI, G., FOLKES, J., PASHBY, I. and SEGAL, J., 2008. Deposition of Ti–6Al–4V using a high power diode laser and wire, Part II: Investigation on the mechanical properties Surface and Coatings Technology. VOL 202(NUMB 19), 4613-4619
• HUSSEIN, N. I. S, SEGAL, J. I and MCCARTNEY, D. G. AND PASHBY, I. R., 2008. Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire Materials Science and Engineering: A. 497(1-2), 260-269 (In Press.)
• HUSSEIN, N. I. S, MCCARTNEY, D. G and PASHBY, I. R. AND SEGAL, J. I., 2007. Heat Flow And Structural Development During Direct Metal Deposition Of Waspaloy Wire Using A High Power Diode Laser In: ICALEO 2007, Orlando, FL, USA, 29 October - 1 November 2007. 56 - 63
• BI, G., PASHBY, I.R., ZHANG, X. and SEGAL, J., 2006. Study on the direct metal deposition of powder with a high power diode laser In: International Conference on Manufacturing and Materials Processing 2006.
• PASHBY, I.R., MOK, S.H. and SEGAL, J., 2006. Structure and Properties of a Ti based Alloy Produced by Direct Metal Deposition with a High Power Diode Laser In: ICMM 2006.
• WISBEY, A., HOLDAWY, P., UBHI, H.S., SEGAL, J., PASHBY, I., JONES, S. and ALLEN, J., 2006. Deposition technologies for high strength Ni alloys In: 17th AeroMat Conference and Exposition, May 15-18, 2006, Seattle, Washington.
• PASHBY, I.R., SEGAL, J. and BI, G., 2005. Laser deposition of Ni base superalloy via high power direct diode laser and wire In: Proceedings of the 3rd International WLT-Conference on Lasers in Manufacturing.
• SEGAL, JI, 2004. Investigation Of The Mechanical Properties Of Injection Moulded Parts Produced With Rapid Tooling