SCHUBEL, P.J., 2012. Cost modelling in polymer composite applications: Case study – Analysis of existing and automated manufacturing processes for a large wind turbine blade Composites Part B. 43(3), 953-960
CROSSLEY, R.J., SCHUBEL, P.J. and WARRIOR, N.A., 2012. The Experimental Determination of prepreg tack and dynamic stiffness Composites Part A. JCOMA3016, (In Press.)
CROSSLEY, R and SCHUBEL, P., 2012. The Development and Processing of a Sustainable Fully Bio Derived Furfural Matrix Flax Fibre Prepreg In: ECCM 15.
ENDRUWEIT, A., GOMMER, F., HUTCHINSON, J., KOUTSONAS, S., LONG, A., SCHUBEL, P., XIAO, X. and ZENG, X., 2012. Resin flow simulation based on advanced reinforcement geometry modelling from yarn-scale to component-scale In: SAMPE - Flow Processes in Composite Materials.
SCHUBEL, P.J., 2011. Cost analysis in using non-crimp fabric composites in engineering applications. In: Non-crimp fabric composites: manufacturing, properties and applications Woodhead Publishing.
SCHUBEL, P., 2011. Manufacturing, Materials and Tooling Optimisation for a 6kW Wind Turbine Blade In: World Wind Energy Conference 2011 (WWEC 2011).
CROSSLEY, R., SCHUBEL, P. and WARRIOR, N., 2011. Development of ATL and materials for low cost production In: 18th International conference on composite materials (ICCM 18).
SHAH, D., SCHUBEL, P., LICENCE, P. and CLIFFORD, M., 2011. Yarn Optimization and plant fibre surface treatment using hydroxyethylcellulose for the development of structural biocomposites In: 18th International conference on composite materials (ICCM 18).
SHAH, D., SCHUBEL, P., CLIFFORD, M and LICENCE, P., 2011. Mechanical characterization of vacuum infused thermoset composites reinforced with aligned hydroxyethylcellulose sized plant fibre yarns In: Ecocomp 2011.
CHALK, M. and SCHUBEL, P., 2011. Development of a Manufacturing System for Automated Production of Offshore Wind Turbine Rotor Blades with reduced Power Consumption In: HdT Wind Turbine Rotor Blades.
SCHUBEL, P. and PICKERING, S., 2011. End of life options for composites In: Improved Composites Recycling & Resource Efficiency in the East Midlands.
HUTCHINSON, J. and SCHUBEL, P., 2011. How to cut the cost of blade production by utilising efficient design tools. In: International small wind conference 2011.
SCHUBEL, P. and WARRIOR, N., 2011. The AIRPOWER Project: Composites Solutions for off-shore Wind Turbine Blades In: Innovative international composites summit (IICS).
WEAGER, B., SCHUBEL, P. and CROSSLEY, R., 2011. Development of environmentally friendly composite prepregs from natural fibres and bioresins In: Autolink Advances in Automotive.
CHALK, M. and SCHUBEL, P., 2011. Novel tooling and low energy heating for automated manufacturing of rotor blades In: Wind turbine rotor blades.
CHALK, M. and SCHUBEL, P., 2010. Development of a low power consumption manufacturing system for automated rotor blade production In: Wind turbine blade manufacture.
CHALK, M. and SCHUBEL, P., 2010. Development of a low power consumption manufacturing system for automated production of offshore wind turbine rotor blades In: Composites Innovation 2010.
CROSSLEY, R. and SCHUBEL, P., 2010. Challenges In Automated Turbine Blade Production; Automated Tape Layup (ATL) of Wind Energy Grade Materials In: EWEC 2010.
HUTCHINSON, J. and SCHUBEL, P., 2010. Rapid immobilisation of advancing resin fronts during vacuum assisted injection moulding of wind energy components In: EWEC 2010.
CROSSLEY, R. and SCHUBEL, P., 2010. The Experimental Determination and Control of Prepreg Tack for Automated Manufacture In: ECCM 14.
SCHUBEL, P., ed., 2009. Blades of Glory: The University of Nottingham Exchange
SCHUBEL, P. and HUTCHINSON, J., 2009. LRTM – A feasible alternative to VI for the manufacture of large scale wind turbine blades In: ICCM17.
CROSSLEY, R. and SCHUBEL, P., 2009. The experimental characterisation of prepreg tack In: ICCM17.
BOATENG, E. and SCHUBEL, P., 2009. Thermal isolation techniques for cure monitoring using FBG optical sensors In: ICCM17.
SCHUBEL, P.J., WARRIOR, N.A. and ELLIOTT, K.S., 2008. Evaluation of concrete mixes and mineral additions when used with controlled permeable formwork (CPF) Construction and Building Materials. 22(7), 1536-1542 SCHUBEL, P.J. and WARRIOR, N.A., 2008. Shrinkage Control of Unsaturated Polyester using Nanostructured Particles: Part II – Characterisation of a ‘Class A’ Laminate Journal of Nanostructured Polymers and Nanocomposites. 4(3), 110-116
SCHUBEL, PJ, WARRIOR, NA and ELLIOTT, KS, 2008. Evaluation Of Concrete Mixes And Mineral Additions When Used With Controlled Permeable Formwork (Cpf) Construction And Building Materials. 22(7), 1536-1542 SCHUBEL, P.J., WARRIOR, N.A. and RUDD, C.D., 2007. Surface Quality Prediction of Textile Composites using Geometric Simulation Tools Plastics, Rubber and Composites: Macromolecular Engineering. 36(10), 428-437 SCHUBEL, P.J. and , 2007. AIRPOWER In: Technology Seminar – BCSD.
SCHUBEL, P.J., JOHNSON, M.S., WARRIOR, N.A. and RUDD, C.D., 2006. Characterisation of thermoset laminates for cosmetic automotive applications: Part III - shrinkage control via nanoscale reinforcement Composites. Part A, Applied Science and Manufacturing. 37(10), 1757-1772 SCHUBEL, P. J., PARSONS, A. J., LESTER, E. H., WARRIOR, N. A. and RUDD, C. D., 2006. Characterisation of thermoset laminates for cosmetic automotive applications: Part II – Cure and residual volatile assessment COMPOSITES PART A. VOL 37(NUMBER 10), 1747-1756 HARPER, L., TURNER, T., SCHUBEL, P., WARRIOR, N. and RUDD, C., 2006. ALBOS - Affordable Lightweight Body Structures DTI.
SCHUBEL, P.J., WARRIOR, N.A. and RUDD, C.D., 2006. Surface roughness modelling of textile composites using TexGen In: TexComp2006.
SCHUBEL, P.J. and WARRIOR, N.A., 2006. Shrinkage Control of Unsaturated Polyester using Nanostructured Particles: Part I – Process Development Journal of Nanostructured Polymers and Nanocomposites. 2(3), 75-86
SCHUBEL, PJ, WARRIOR, NA, KENDALL, KN and RUDD, CD, 2006. Characterisation Of Thermoset Laminates For Cosmetic Automotive Applications: Part I - Surface Characterisation Composites Part A-Applied Science And Manufacturing. 37(10), 1734-1746 SCHUBEL, PJ, PARSONS, AJ, LESTER, EH, WARRIOR, NA and RUDD, CD, 2006. Characterisation Of Thermoset Laminates For Cosmetic Automotive Applications: Part Ii - Cure And Residual Volatile Assessment Composites Part A-Applied Science And Manufacturing. 37(10), 1747-1756 SCHUBEL, P. J., HARPER, L. T., TURNER, T. A., WARRIOR, N. A., RUDD, C. D. and KENDALL, K. N., 2004. Surface Analysis of "Class A" Polymer Composite Substrates for the Automotive Industry PROCEEDINGS OF THE ASIAN-AUSTRALASIAN CONFERENCE ON COMPOSITE MATERIALS. CONF 4, 521-526
WARRIOR, N.A., RUDD, C.D., TURNER, T.A., SCHUBEL, P.J. and HARPER, L.T, 2004. Affordable Lightweight Body Structures In: IOM3 Materials Congress. Session 6B. (6 pages)
WARRIOR, N., HARPER, L., TURNER, T., SCHUBEL, P., RUDD, C. and KENDALL, K., 2004. Affordable Lightweight Body Structures (ALBOS) Dti/DfT Foresight Vehicle Programme In: JSAE Japan Society of Automotive Engineers Annual Congress. Paper No. 20045470, Session Material II No 86
WARRIOR, N.A., RUDD, C.D., TURNER, T.A., SCHUBEL, P.J. and HARPER, L.T, 2003. Affordable Lightweight Body Structure In: Lean Weight Vehicles 5 Conference. 6